lssystemip

Parameters

-nohdr

(Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. The -nohdr parameter suppresses the display of these headings.

Note: If there is no data to be displayed, headings are not displayed.

-delim delimiter

(Optional) By default in a concise view, all columns of data are space-separated. The width of each column is set to the maximum width of each item of data. In a detailed view, each data item has its own row, and if the headers are displayed, the data is separated from the header by a space. The -delim parameter overrides this behavior. Valid input for the -delim parameter is a 1-byte character. If you enter -delim : on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter.

-filtervalueattribute=value

(Optional) Specifies a list of one or more filters. Only objects with a value that matches the filter attribute value are displayed. If a capacity is specified, the units must also be included.

Note: Some filters allow the asterisk character (*) when you enter the command. The following rules apply to the use of wildcard characters when you use the command-line interface (CLI):

• The wildcard character is an asterisk (*).
• The command can contain a maximum of one wildcard.
• When you use a wildcard, you must enclose the filter entry within double quotation marks (""), as shown in the following example:

  lssystemip -filtervalue  "system_name=md*"

-filtervalue?

(Optional) displays a list of filters that can be applied against this view. The following filter attributes are valid for the lssystemip command:

• port_id
• system_name
• system_id

system_id | system_name

(Required) Specifies the name or ID of a system.

-portsystem_port

(Required) Specifies the system port (1 or 2) to apply changes to.