lsfabric

Parameters

-nohdr

(Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. The -nohdr parameter suppresses the display of these headings.

Note: If there is no data to be displayed, headings are not displayed.

-delim delimiter

(Optional) By default in a concise view, all columns of data are space-separated. The width of each column is set to the maximum width of each item of data. In a detailed view, each item of data has its own row, and if the headers are displayed, the data is separated from the header by a space. The -delim parameter overrides this behavior. Valid input for the -delim parameter is a 1-byte character. If you enter -delim : on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter.

-node node_name | node_id

(Optional) Displays the output for all ports for the specified node. The only parameter that you can specify with the -node parameter is the -port parameter.

-portport_id

(Optional) Displays a concise view of all worldwide port names (WWPNs) that are logged into the specified port ID and node. The -port parameter must be specified with only the -node parameter. A valid port_id value is from a minimum of one through a maximum equal to the number of node Fibre Channel (FC) I/O ports. It specifies the port number in the vital product data (VPD) or the hexadecimal WWPN of the local port.

-wwpnwwpn

(Optional) Displays a list of all ports that have a login to the specified WWPN. You cannot use the -wwpn parameter with any other parameter.

-hosthost_id_or_name

(Optional) Specifies a host name or ID. Issuing the lsfabric command with the -host parameter is equivalent to issuing the lsfabric wwpnwwpn command for every configured WWPN of the specified host. For example, a host with two ports that are zoned to one port of every node in an eight-node clustered system (system) produces 16 lines of output. You cannot use the -host parameter with any other parameter.

-controllercontroller_id_or_name

(Optional) Specifies a controller ID or name. You cannot use the -controller parameter with any other parameter in this command. Issuing the lsfabric command with the -controller parameter is equivalent to issuing the lsfabric wwpnwwpn command for every configured WWPN of the specified controller. For example, a controller with four ports that are connected to an eight node system with two counterpart SANs produces 64 lines of output.

-clustercluster_id_or_name

(Optional) Specifies a system ID or name. You cannot use the -cluster parameter with any other parameter. Issuing the lsfabric command with the -cluster parameter is equivalent to issuing the lsfabric wwpnwwpn command for every known WWPN in the specified system. Output is sorted by remote WWPNs and then system WWPNs. This parameter can be used to check the state of connections within the local system or between the local and remote system. When the local system ID or name is specified, each node-to-node connection is listed twice: once from each end. For example, an eight-node system with two counterpart SANs produces eight nodes, which are multiplied by seven other nodes, which are multiplied by two SANs, multiplied by four point-to-point logins, equals 448 lines of output.

Note: The system must be configured in a remote copy partnership with the local system. Remote copy includes Metro Mirror, Global Mirror, and HyperSwap^®. It must appear in the lssystem view.

-bytes

(Optional) Displays all capacities as bytes.