Use the chthrottle command to change attributes associated with a
specified throttle object.
Syntax
chthrottle [ -bandwidth bandwidth_limit_in_mb ] [ -iops iops_limit ] [ -name throttle_name ] { throttle_id | throttle_name }
Parameters
- -bandwidthbandwidth_limit_in_mb
- (Optional) Specifies the bandwidth in MBps. This must be a numeric value 0 - 268435456.
Note: No
bandwidth limit is set unless you specify this keyword.
- -iopsiops_limit
- (Optional) Specifies the I/O operations limit. This must be a numeric value 0 - 33554432.
Note: No
I/O operations limit is set unless you specify this keyword.
- -namethrottle_name
- (Optional) Specifies the throttling object's name. This value must be an alphanumeric string up
to 63 characters long.
- throttle_id | throttle_name
- (Required) Specifies the volume ID or name of the volume to throttle. The value must be a
numeric or alphanumeric string up to 15 characters long.
Description
This command changes attributes associated with a specified throttle object.
An invocation example for changing the bandwidth limit to 100 for an
offloaded throttle
chthrottle -bandwidth 100 offloadThrottle
The detailed resulting output:
No feedback
An invocation example with no throttling bandwidth limit specified for ID 0
chthrottle -bandwidth 100 0
The detailed resulting output:
No feedback