Managing the system

You can use the command-line interface (CLI) to manage your system.

Changing the system gateway address by using the CLI
You can use the command-line interface (CLI) to change the gateway address for a system.
Managing SSH keys using the CLI
You can use the command-line interface (CLI) to work with Secure Shell (SSH) keys.
Changing the relationship bandwidth for a system by using the CLI
You can use the command-line interface (CLI) to change the relationship bandwidth for a system.
Setting the maximum replication delay
You can use the chsystem command to set the maximum replication delay for the system. This value ensures that the single slow write operation does not affect the entire primary site.
Modifying system IP addresses using the CLI
Use the command-line interface (CLI) to change the IP addresses that are associated with a system.
Shutting down a system by using the CLI
You can use the command-line interface (CLI) to shut down a system.
Managing SNMP notifications by using the CLI
You can set up and manage notifications that use by using the command-line interface (CLI).
Setting up syslog notifications using the CLI
You can set up syslog event notifications by using the command-line interface (CLI).
Powering on and powering off the clustered system
To power on or to power off the system, complete the steps in this procedure in the order given.
Changing the system topology
You can use the command-line interface or the management GUI to change the system topology.
Managing the throttle for offload I/O
You can create, modify, and remove the offload I/O throttle by using the management GUI or the command-line interface.

Parent topic: Administering