Explanation
The node canister has been moved
to an expansion enclosure. A node canister will not operate in this
environment. This can also be reported when a replacement
node canister is installed for the first time.
User Response
If this node error is reported when a node canister
is being replaced with a field-replaceable unit (FRU) or a customer-replaceable
unit (CRU), apply Procedure: Rescuing Lenovo Storage V7000 Gen2 node canister software from another node (node rescue) to rescue the replacement node canister.
Follow troubleshooting procedures
to relocate the nodes to the correct location.
- Follow the procedure Getting node canister and system
information using a USB flash drive and review the saved location
information of the node canister to determine which control enclosure
the node canister belongs in.
- Follow the procedure to move the node canister to
the correct location, then follow the procedure to move the expansion
canister that is probably in that location to the correct location.
If there is a node canister that is in active state where this node
canister must be, do not replace that node canister with this one.