You can view information about the node canister and system using a USB flash drive.
Use any
USB flash drive with a FAT32 file system on its first partition.
- Ensure that the USB flash drive does not contain a file named satask.txt in the root directory.
If satask.txt does exist in the directory, the node attempts to run the command that is specified in the file. The information
that is returned is appended to the satask_result.html file. Delete this file if you no longer want the previous output.- Insert the USB flash drive in the USB port of the node from
which you want to collect data.
The node fault light-emitting
diode (LED) flashes while information is collected and written to
the USB flash drive.
- Wait until the LED stops flashing before removing the USB flash drive.
Because the LED is a fault indicator, it might remain permanently
on or off.
- View the results in file satask_result.html in a web browser. The file contains the details and results of the
command that was run and the status and the configuration information
from the node canister.