Use the chenclosuredisplaypanel command to modify the properties for
an enclosure display panel.
Syntax
chenclosuredisplaypanel [ -clearswap ] [ -displaypanel displaypanel_id ] enclosure_id
Parameters
- -clearswap
- (Optional) Specifies that the enclosure display panel swap bit be cleared.
- -displaypanelsem_id
- (Optional) Specifies the display panel ID to change. The value must be a number.
- enclosure_id
- (Required) Specifies the enclosure ID for the enclosure that contains the display panel. The
value must be a number 1 - 99.
Description
This command modifies the properties for an enclosure display panel.
An invocation example
chenclosuredisplaypanel -clearswap -displaypanel 1 3
The resulting output:
No feedback