Syntax
addcontrolenclosure -iogrp io_grp_id_or_name -sernum enclosure_serial_number [ -site { site_name | site_id } ]
Parameters
- -iogrp io_grp_id_or_name
- The I/O group in which you want to put the control enclosure.
- -sernum enclosure_serial_number
- The serial number of the control enclosure you want to add.
- -sitesite_name | site_id
- (Optional) Specifies the numeric site value or site name of the new control enclosure. The site
can be set to a value of 1 or 2 only.
Note: The site that is assigned to a control enclosure
cannot be changed if the topology is hyperswap.
Description
Use this command to add a control enclosure to the system.
Note: Transparent cloud tiering can be enabled on a system if
every node on the system supports it. If a system supports transparent cloud tiering, you cannot add
nodes that do not support it to the system.
An invocation example
addcontrolenclosure -iogrp 0 -sernum 2361443
The following output is displayed:
Enclosure containing Node, id [x], successfully added
An
invocation example
addcontrolenclosure -iogrp 1 -sernum 1234567 -site site2
The following output is displayed:
Enclosure, Node id [2], successfully added