Use the chsyslogserver command to modify
the parameters of an existing syslog server.
Syntax
chsyslogserver [ -name server_name ] [ -ip ip_address ] [ -facility facility ] [ -error { on | off } ] [ -warning { on | off } ] [ -info { on | off } ] [ -cadf { on | off } ] { syslog_server_name | syslog_server_id }
Parameters
- -nameserver_name
- (Optional) Specifies a name to assign to the syslog server. The
name must be unique. When specifying a server name, syslog is a reserved
word.
- -ipip_address
- (Optional) Specifies an IP address to assign to the syslog server.
This must be a valid IPv4 or IPv6 address.
- -facilityfacility
- (Optional) Specifies a facility number to identify the origin of the message to the receiving
server. Servers configured with facility values of 0 - 3 receive
syslog messages in concise format. Servers configured with facility values of 4 -
7 receive syslog messages in fully-expanded format. This parameter is mutually-exclusive with
-cadf.
- -erroron|off
- (Optional) Specifies whether the server receives error notifications. Set to
on, error notifications are sent to the syslog server. Set to off,
error notifications are not sent to the syslog server.
- -warningon|off
- (Optional) Specifies whether the server receives warning notifications. Set to
on, warning notifications are sent to the syslog server. Set to
off, warning notifications are not sent to the syslog server.
- -infoon|off
- (Optional) Specifies whether the server receives information notifications. Set to
on, information notifications are sent to the syslog server. Set to
off, information notifications are not sent to the syslog server.
- -cadfon|off
- (Optional) Specifies that Cloud Auditing Data Federation (CADF) data reporting be turned
on or off. Any syslog notifications sent to the server are
formatted to the CADF standard. This parameter is mutually-exclusive with
-facility.
- syslog_server_name | syslog_server_id
- (Required) Specifies the name or ID of the server to be modified.
Description
Use this command to change the settings of an existing syslog
server. You must specify either the current name of the server or
the ID returned at creation time. Use the lssyslogserver command to obtain this ID.
For syslog servers, SNMP servers, and email users with
type set to
local, the valid combinations
of notification types are:
- -error, -warning, and -info
- -error and -warning
If you disable CADF notifications for a syslog
server that has CADF notification enabled, the facility value must be set to 0.
An invocation example
chsyslogserver -facility 5 2
The resulting output:
No feedback
An invocation example
chsyslogserver -cadf on 0
The resulting output:
No feedback