Use the rescuenode command to start
automatic recovery for a specific node.
Syntax
satask rescuenode -force [ panel_name ]
Parameters
- panel_name
- (Optional) Identifies the node being serviced.
Note: If panel_name is
not supplied, this applies to the node on which the command is running.
- -force
- (required) The -force parameter is required because this service action can
cause temporary or permanent loss of access to data. Use this command only when the node reports
corrupted system code (code).
Description
This command starts automatic recovery for a specific node. Use this command only when the node
reports corrupted code.
An invocation example
satask rescuenode -force 112233
The
resulting output:
No feedback