Before you set up your Lenovo Storage V7000 environment, verify that the prerequisite
conditions are met.
This information applies to the supported hardware components.
Answer the following questions before starting the installation
process.
- Does your physical site meet the environment requirements for Lenovo Storage V7000?
- Do you have adequate rack space for your hardware?
The Lenovo Storage V7000 requires
two Electronic Industries Alliance (EIA) units for each control enclosure
or expansion enclosure.
- Do the power circuits that you are planning to use have sufficient
capacity and the correct sockets for your Lenovo Storage V7000 installation?
- A clearly visible and accessible emergency
power off switch is required.
- For redundancy, two independent power circuits are required. One
circuit connects to each power supply in each enclosure.
- If you are using
the redundant AC-power switch, the redundant AC-power switch main input and the other circuit connect to the redundant AC-power switch backup input.
- Have you provided appropriate connectivity by preparing your environment?