After you open your shipment, you must verify the contents
against the packing slip.
In each box, locate the packing slip. Verify that the
items that are listed in the packing slip match what is in the box,
and that any optional items that you ordered are included in the list.
Your shipment might contain extra items, depending on the order.
Note: If you purchased your equipment through a reseller, some of
the options might be preinstalled. Contact your supplier for details.
Use the following checklist to check off the items in your order
as you verify that they are included in your shipment.
- Control enclosures and expansion
enclosures. For more information about the supported machine types
and models, see Table 1 and Table 2 in Lenovo Storage V series overview.
- Rack-mounting hardware kit:
- Two rails (right and left assembly)
- Two rail springs
- Two sets of rail-mount screws and alternative rail-mount pins
(large and small) for non-IBM racks
- Two power cords for connection to rack-mounted power distribution
units
- Drive bay blanking plates (installed in the enclosure)
Options applicable to control enclosures
- Cache memory upgrade (16 GB for Lenovo Storage V3700
V2 XP and 32 GB for Lenovo Storage V5030 and Lenovo Storage V5030F)
- Fibre Channel cables
- SAS cables
- Drives
- Power cords for connection to wall sockets
- Four-port 16 Gbps Fibre Channel
HBA
- Two-port 25 Gbps Ethernet
(RoCE or iWARP) host interface
adapter
- Four-port 10 Gbps Ethernet adapter
(iSCSI, FCoE)
- Four-port 12 Gbps SAS HBA
- Four-port 1 Gbps Ethernet adapter
(iSCSI)
Options applicable to
expansion enclosures
- Expansion enclosure attachment cables
- Drives
- Power cords for connection to wall sockets