You can manage HP Integrity server devices by using the OpenVMS Extensible Firmware Interface (EFI) utilities.
You can use the following OpenVMS EFI utilities to manage devices for an Integrity server from the EFI console; for example, if you are using SAN boot.
VMS_SHOW.EFI dev VMS: DQA0 IDE Drive EFI: fs0: Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master) VMS: EIA0 00-30-6E-F3-F2-52 EFI: Acpi(HWP0002,0)/Pci(3|0)/Mac(00306EF3F252) VMS: DKA0 HP 36.4GST336753LC HPC4 V8.2-1 EFI: fs1: Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0) VMS: EWA0 00-30-6E-F3-52-2C EFI: Acpi(HWP0002,100)/Pci(2|0)/Mac(00306EF3522C) VMS: DGA78 IBM 2145 V8.2-1 EFI: fs5: Acpi(HWP0002,300)/Pci(1|0)/Pci(4|0)/Fibre(WWN500507680140000c, Lun1000000000000) VMS: DGA78 IBM 2145 V8.2-1 EFI: fs3: Acpi(HWP0002,300)/Pci(1|0)/Pci(4|0)/Fibre(WWN500507680140000c, Lun1000000000000)
fs3:\efi\vms> VMS_BCFG.EFI boot show The boot option list is: 01. VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9) "EFI Shell [Built-in]" 02. Acpi(HWP0002,300)/Pci(1|0)/Pci(4|0)/Fibre(WWN500507680140000c,Lun1000000000000) /HD(Part1,Sig0C516100-6657-11DC-AA2E-AA000400FEFF)/ \efi\vms\vms_loader.efi "OpenVMS on $1$DGA78: FGA0.5005-0768-0140-000c" 03. Acpi(HWP0002,300)/Pci(1|0)/Pci(4|0)/Fibre(WWN500507680140000c,Lun1000000000000) /HD(Part1,Sig0C516100-6657-11DC-AA2E-AA000400FEFF)/ \efi\vms\vms_loader.efi "OpenVMS on $1$DGA78: FGA0.5005-0768-0140-000c" 04. Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig76D23A51-9B8B-11DB-A618- AA000400FEFF)/\efi\vms\vms_loader.efi "DKA0 PKA0.0" OPT 05. Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig76D23A51-9B8B-11DB-A618- AA000400FEFF)/\efi\vms\vms_loader.efi "HP-UX Primary Boot: 0/1/1/0.0.0" 06. Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master) "CDROM" OPT fs3:\efi\vms>
For more information, see svc_confopenvms_2qp19r.html.