You must be aware of the requirements for attaching the
system to HP 9000 and HP Integrity servers.
You must meet the following requirements before you can
attach the system to your host:
- Check the LUN limitations for your host. Ensure that enough Fibre
Channel adapters are installed in the server to manage the total LUNs
that you want to attach.
Note: If you want to use more than eight LUNs
per SCSI target, you must set the type attribute to hpux when you create the host object. You can use the system command-line
interface or the management GUI to set this attribute.
- The system supports HP-UX version 11.31 September 2007 (and later
0803) releases. Hosts that attach to the system and that have 0709
patches must also have the following patches applied:
- PHKL_37453 (esdisk)
- PHKL_37454 (esctl)
- PHCO_37483 (scsimgr)
The 0803 bundle contains these patches. Note: An RPQ is required
if you are using a version earlier than the HP-UX 11.31 September
2007 release.
- Ensure that you have the documentation for your HP system and
the installation information for your hardware.
- Ensure that you installed the correct operating systems and version
levels on your host.
The following website provides all system publications:
https://datacentersupport.lenovo.com/