For Lenovo Storage V3700
V2 XP, you can upgrade the amount of canister memory from 8 Gb to 16 Gb.
For a Lenovo Storage V5030 or Lenovo Storage V5030F system, you can upgrade the amount of canister memory
from 16 Gb to 32 Gb.
- Follow Procedure: Removing a node canister to disconnect
and remove the node canister that you want to upgrade.
- Remove the lid of the canister, as described in Procedure: Removing and replacing lid of a node canister.
- Locate the DIMM slots:
Slot 1 is next to the CPU. Slot 2 is next to the battery area.
The memory modules do not stand up. They lie in a cascading fashion.
You add a DIMM to the empty slot that is located above the DIMM that
is already installed.
- Ensure that the retaining clips of the DIMM slot are open.
- Gently place the DIMM in the slot and ensure that the notches
in the DIMM align with the shape of the slot.
- Apply even, firm, downwards pressure on the DIMM in its
slot until the retaining clips move inwards and engage the edges of
the DIMM.
- Ensure that the retaining clips are fully engaged with
the edges of the DIMM.
Gently pull the DIMM upwards and ensure that it does not become
dislodged.
Figure 1. Installing a DIMM
- Replace the canister lid, as described in Procedure: Removing and replacing lid of a node canister.
- Reinstall the canister into the enclosure from which it
was removed in step 1.
When the canister is reinserted and powered on, it has
an 841 error.
- Follow the directed maintenance procedure (DMP) to accept
the new memory.
The canister restarts and comes back online configured with
16 Gb or 32 Gb of RAM depending on the Lenovo Storage V series system that you are upgrading.
- Reconnect the cables to the canister, ensuring that cables
go into the same ports from which they were removed in step 1.
