When you install a control enclosure, you can connect it
to a host with SAS cables. On Lenovo
Storage V3700 V2 XP systems, you can use the 12 Gbps onboard host SAS ports or an optional
4-port 12 Gbps SAS host interface adapter. Onboard SAS host ports
are not available on Lenovo Storage V3700 V2 or Lenovo Storage V5030 systems.
Two types of SAS cables are used for host attachment,
depending on the requirements of the host.
- Mini SAS HD to Mini SAS HD (Figure 1)
Figure 1. Mini SAS HD to Mini SAS HD cable
- Mini SAS HD to Mini SAS (Figure 2)
Figure 2. Mini SAS HD to Mini SAS cable
Note: When you insert a SAS cable, make sure that the connector
is oriented correctly.
- When you connect cables to the SAS ports on the left side of the
node canister, the blue pull tab must be below the connector.
- Insert the connector gently until it clicks into place.
If you feel resistance, the connector is probably oriented the wrong
way. Do not force it.
- When inserted correctly, the connector can only be removed by
pulling the tab.
To install the cables, complete the following steps.
- Connect the required number of SAS cables.
Refer to Planning network cable connections to
determine the number of cables required.Note: When you connect cables to the SAS ports on the left side
of the node canister, each host must be connected to both canisters.
Both canisters must have the same number of cables connected.
- Arrange the cables to provide access to the hardware.
- USB ports. USB port access is required when you use a USB flash drive to configure the system.
- The enclosures themselves. Access
is required to the hardware for servicing and for safely removing
and replacing components by using two or more people.
Figure 3 shows
the location of the onboard 12 Gbps SAS ports on a
Lenovo
Storage V3700 V2 XP system. In this example, the optional 4 port 12 Gbps SAS host adapter
is also installed.
Figure 3. Location of available SAS ports on a Lenovo
Storage V3700 V2 XP system
For information about
SAS cabling and the optional 12 Gbps SAS host interface adapters,
refer to Connecting SAS cables to a SAS 4-port interface adapter.