Use the lsenclosuredisplaypanel command to display information about
the display panel in an enclosure.
Syntax
lsenclosuredisplaypanel -displaypanel displaypanel_id [ -nohdr ] [ -delim delimiter ] [ enclosure_id ]
Parameters
- -displaypaneldisplaypanel_id
- (Required) Specifies the display panel ID for the display panel that is being displayed. The
value must be a number.
- -nohdr
- (Optional) By default, headings are displayed for each column of data in a concise style view,
and for each item of data in a detailed style view. The -nohdr parameter
suppresses the display of these headings.
Note: If there is no data to be displayed, headings are not
displayed.
- -delim delimiter
- (Optional) By default in a concise view, all columns of data are space-separated. The width of
each column is set to the maximum width of each item of data. In a detailed view, each item of data
has its own row, and if the headers are displayed, the data is separated from the header by a space.
The -delim parameter overrides this behavior. Valid input for the
-delim parameter is a 1-byte character. If you enter -delim
: on the command line, the colon character (:) separates all items of data
in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data
is separated from its header by the specified delimiter.
- enclosure_id
- (Required) Specifies the enclosure ID for the enclosure data that is being displayed. The value
must be a number 1 - 99.
Description
This command displays information about the display panel in an enclosure.
This table provides the attribute values that can be displayed as output view data.
Table 1. ? output| Attribute |
Description |
|---|
| enclosure_id |
Indicates the enclosure ID for the enclosure that contains the display panel.
The value must be a number 1 - 99. |
| displaypanel_id |
Indicates the ID of the display panel that is in the enclosure. The value must
be a number. |
| status |
Indicates the display panel status for the display panel that is in the
enclosure. The values are: - enum
- online
- degraded
- offline
|
| error_sequence_number |
Indicates the event log sequence number for the current event that is logged
against the secondary expander module (SEM). The value is blank if there is no event to log. |
| FRU_part_number |
Indicates the FRU part number of the display panel. The value must be a
7-character numeric string. |
| FRU_identity |
Indicates the FRU identity of the display panel. The value must be a
22-character alphanumeric string. |
A concise invocation example
lsenclosuredisplaypanel
The resulting output:
enclosure_id display_panel_id status
1 1 online
2 1 online
3 1 online
A detailed invocation example
lsenclosuredisplaypanel -displaypanel 1 3
The resulting output:
enclosure_id 3
displaypanel_id 1
status online
error_sequence_number
FRU_Part_Number *******
FRU_Identity **********************