1126: Power Supply Unit fault type 2

Explanation

A fault exists on the power supply unit (PSU).

User Response

  1. Reseat the PSU in the enclosure.
    Attention: To avoid losing state and data from the node, use the satask startservice command to put the node into service state so that it no longer processes I/O. Then you can remove and replace the top power supply unit (PSU 2). This precaution is due to a limitation in the power-supply configuration. Once the service action is complete, run the satask stopservice command to let the node rejoin the system.
  2. If the fault is not resolved, replace the PSU.

Possible Cause-FRUs or other:

  1. No Part (30%)
  2. PSU (70 %)