resetleds

Use the resetleds command to simultaneously switch off all light-emitting diodes (LEDs) in the system, including node battery LEDs.

Syntax

resetleds

Parameters

None.

Description

The resetleds command simultaneously switches off all LEDs in the system, including node battery LEDs. This ensures that any identity LED switched on is the only one in the system that is switched on. This command works only on LEDs that are on systems that can communicate, which means they are online or of a supported type. This command fails if an object is offline, or if the enclosure is an unsupported type. This command does not affect LEDs:

On independently-controlled objects
On offline objects
With hardware-only controls

An invocation example

resetleds

The resulting output:

No feedback