Use the chenclosurepsu command to modify
the properties of an enclosure power-supply unit (PSU).
Syntax
chenclosurepsu [ -psupsu_id ] enclosure_id
Parameters
- -psu psu_id
- Identifies the PSU in the enclosure that the command will apply to.
- enclosure_id
- Identifies the enclosure that the slot is a member of.
Description
This
command enables you to modify the properties of an enclosure PSU.
An invocation example
chenclosurepsu -psu 2 2
The
resulting output:
There is no output if the command is successful.