Installing an activation key

Use the information in this topic to add an optional feature to your server.

To install a FoD activation key, complete the following steps:

1. Log in to the IMM2. For more information, see Logging in to the IMM2.
2. From the IMM2 web interface, click on the IMM Management tab; then, click Activation Key Management.
   
   
3. From the Activation Key Management page, click Add....
   
   
4. In the Add Activation Key window, click Select File...; then, select the activation key file to add in the File Upload window and click Open to add the file or click Cancel to stop the installation. To finish adding the key, click OK, in the Add Activation Key window, or click Cancel to stop the installation.
   
   

   The Success window indicates that the activation key is installed.

   
   
   

   Note

   • If the activation key is not valid, you will see the following error window.
     
     
   • If you are attempting to install the activation key on a machine type that does not support the FoD feature, you will see the following error window.
     
     
5. Click OK to close the Success window.

   The selected activation key is added to the server and appears in the Activation Key Management page.