Use this information to remove a USB embedded hypervisor
flash device.
To remove a hypervisor flash device, complete the following
steps:
- Read the safety information that begins on Safety and Installation guidelines.
- Turn off the server and peripheral devices and disconnect
the power cords.
- Remove the cover (see Removing the cover).
- Grasp the flash device blue lockbar (shown in the following
illustration) and slide it toward the SAS/SATA riser-card assembly
to the unlock position and remove it from the connector.
Figure 1. USB embedded hypervisor flash device removal
If you are instructed to return the flash device, follow
all packaging instructions, and use any packaging materials for shipping
that are supplied to you.