Removing the bezel

Use this information to remove the bezel.

To remove the bezel, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect the power cords.
  3. Remove the cover (see Removing the cover).
  4. Remove the hard disk drives and filler panels from the hard disk drive bays.
  5. Remove the screws from the bezel.
    Figure 1. Screws removal
    Screws removal
  6. Remove the screws from the video connector.
  7. Pull the top of the bezel out slightly; then, rotate it downward until the tabs on the bottom of the bezel disengages from the chassis and set it aside.
    Figure 2. Bezel removal
    Bezel removal