Skip to main content

Installing the microprocessor 2 air baffle

Use this information to install the microprocessor 2 air baffle.

To install the air baffle, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Align the microprocessor 2 air baffle tab with the hole on the side of the power-supply cage; then insert the tab into the hole on the cage (make sure that the front end of the air baffle is lined up with the blue touch point tab on the left side of fan 6). Press the air baffle down until it is securely seated.
    Figure 1. Microprocessor 2 air baffle installation
    Microprocessor 2 air baffle installation
  3. Install the cover (see Installing the cover).
  4. Slide the server into the rack.
  5. Reconnect the power cords and any cables that you removed.
  6. Turn on the peripheral devices and the server.