Use this information to recover the server firmware and
restore the server operation to the primary bank.
Note: Use this method if the BRD LED on the light path diagnostics
panel is lit and there is a log entry or Booting Backup Image is
displayed on the firmware splash screen; otherwise, use the in-band
manual recovery method.
- Boot the server to an operating system that is supported
by the firmware update package that you downloaded.
- Perform the firmware update by following the instructions
that are in the firmware update package readme file.
- Restart the server.
- At the firmware splash screen, press F3 when prompted to
restore to the primary bank. The server boots from the primary bank.