Light path diagnostics panel
The light path diagnostics panel is located on the top of the operator information panel.
Rear view
Use this information to view the controls, LEDs, and connectors on the rear of the server.
System pulse LEDs
The following LEDs are on the system board and monitors the system power-on and power-off sequencing and boot progress.
Server power features
When the server is connected to a power source but is not turned on, the operating system does not run, and all core logic except for the service processor (the integrated management module) is shut down; however, the server can respond to requests from the service processor, such as a remote request to turn on the server.