Subsystem [MemoryElementName] has insufficient memory for operation. (ABR Status)
This message is for the use case when an implementation has detected that
the usable Memory is insufficient for operation.
May also be shown as
806f000f220102xx or 0x806f000f220102xx
Alert Category
Critical - Memory
CIM Information
Prefix:PLAT
and ID:0132
Automatically Notify Support
No
User Response
1. Make sure the server meets the minimum configuration to start (see Power-supply LEDs).
2. Update the server firmware on the primary page.
Important: Some cluster solutions require specific code levels or coordinated code updates.
If the device is part of a cluster solution, verify that the latest level of code is supported for
the cluster solution before you update the code.
3. (Trained technician only) Replace the system board.
Firmware Error :