The System [ComputerSystemElementName] has detected no memory in the system. (ABR Status)
This message is for the use case when an implementation has detected that memory was detected in the system.
May also be shown as
806f000f220101xx or 0x806f000f220101xx
Alert Category
Critical - Memory
CIM Information
Prefix:PLAT
and ID:0794
Automatically Notify Support
No
User Response
1. Make sure the server meets the minimum configuration to start (see Power-supply LEDs).
2. Recover the server firmware from the backup page: a. Restart the server.
b. At the prompt, press F3 to recover the firmware.
3. Update the server firmware on the primary page.
Important: Some cluster solutions require specific code levels or coordinated code updates.
If the device is part of a cluster solution, verify that the latest level of code is supported for
the cluster solution before you update the code.
4. Remove components one at a time, restarting the server each time, to see if the problem goes away.
5. If the problem remains, (Trained technician only) replace the system board.
Firmware Error :