Sensor [SensorElementName] has transitioned to critical from a less severe state. (PS 1 OP Fault)
This message is for the use case when an implementation has detected a
Sensor transitioned to critical from less severe.
May also be shown as
800702080a01xxxx or 0x800702080a01xxxx
Alert Category
Critical - Power
CIM Information
Prefix:PLAT
and ID:0522
Automatically Notify Support
No
User Response
1. Make sure that there are no obstructions, such as bundled cables, to the airflow from the power-supply fan.
2. Use the IBM Power Configurator utility to determine current system power consumption. For more
information and to download the utility, go to http://www-03.ibm.com/systems/bladecenter/resources/powerconfig.html.
3. Replace power supply n. (n = power supply number)
PS 1 Therm Fault :