Sensor [SensorElementName] has transitioned to critical from a less severe state. (Planar Fault)
This message is for the use case when an implementation has detected a
Sensor transitioned to critical from less severe.
May also be shown as
800702020701xxxx or 0x800702020701xxxx
Alert Category
Critical - Voltage
CIM Information
Prefix:PLAT
and ID:0522
Automatically Notify Support
No
User Response
1. Check the system-event log.
2. Check for an error LED on the system board.
3. Replace any failing device.
4. Check for a server firmware update.
Important: Some cluster solutions require specific code levels or coordinated code updates.
If the device is part of a cluster solution, verify that the latest level of code is supported for
the cluster solution before you update the code.
5. (Trained technician only) Replace the system board.