Removing and replacing Tier 1 CRUs

Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.

The illustrations in this document might differ slightly from your hardware.

Removing hot-swap hard disk drives
Use this information to remove hot-swap hard disk drives.
Replacing hot-swap hard disk drives
Use this information to replace hot-swap hard disk drives.
Removing simple-swap hard disk drives
Use this information to remove simple-swap hard disk drives.
Replacing simple-swap hard disk drives
Use this information to replace simple-swap hard disk drives.
Removing a DVD drive
Use this information to remove a DVD drive.
Replacing a DVD drive
Use this information to replace a DVD drive.
Removing the DVD drive cable
Use this information to remove the DVD drive cable.
Replacing the DVD drive cable
Use this information to replace the DVD drive cable.
Removing a memory module
Use this information to remove a memory module.
Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs.
Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly.
Replacing a PCI riser-card assembly
Use this information to replace a PCI riser-card assembly.
Removing the PCI riser-card bracket from the riser card
Use this information to remove the PCI riser-card bracket from the riser card.
Replacing the PCI riser-card bracket to the riser card
Use this information to replace the PCI riser-card bracket to the riser card.
Removing an adapter
Use this information to remove an adapter.
Replacing an adapter
The following notes describe the types of adapters that the server supports and other information that you must consider when you install an adapter.
Removing a ServeRAID SAS/SATA controller
Use this information to remove a ServeRAID SAS/SATA controller.
Replacing a ServeRAID SAS/SATA controller
Use this information to replace a ServeRAID SAS/SATA controller.
Removing the ServeRAID adapter memory module
Use this information to remove the ServeRAID adapter memory module.
Replacing the ServeRAID adapter memory module
Use this information to replace the ServeRAID adapter memory module.
Removing the dual-port network adapter
Use this information to remove the dual-port network adapter.
Replacing the dual-port network adapter
You can purchase one of the following dual-port network adapters to add two additional network ports in the server.
Removing a hot-swap fan
Use this information to remove a hot-swap fan.
Replacing a hot-swap fan
Use this information to replace a hot-swap fan.
Removing a power supply
Use this information to remove a power supply.
Replacing a power supply
Use this information to replace a power supply.
Removing the hot-swap drive backplane
Use this information to remove the hot-swap drive backplane.
Replacing the hot-swap drive backplane
Use this information to replace the hot-swap drive backplane.
Removing the simple-swap drive backplate assembly
Use this information to remove the simple-swap drive backplate assembly.
Replacing the simple-swap drive backplate assembly
Use this information to replace the simple-swap drive backplate assembly.
Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device.
Replacing a USB embedded hypervisor flash device
Use this information to replace a USB embedded hypervisor flash device.
Removing the system battery
Use this information to remove the system battery.
Replacing the system battery
Use this information to replace the system battery.
Removing the bezel
Use this information to remove the bezel.
Replacing the bezel
Use this information to replace the bezel.
Removing the front USB connector assembly
Use this information to remove the front USB connector assembly.
Replacing the front USB connector assembly
Use this information to replace the front USB connector assembly.
Removing the front video connector assembly
Use this information to remove the front video connector assembly.
Replacing the front video connector assembly
Use this information to replace the front video connector assembly.
Removing the operator information panel assembly
Use this information to remove the operator information panel assembly.
Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly.

Parent topic: Removing and replacing server components