Skip to main content

Cabling backplane

Use this information to cable the backplane.

The following illustration shows the internal routing and connectors for the 3.5-inch simple-swap hard disk drives SATA signal and power cables.
Figure 1. 3.5-inch simple-swap backplate assembly cable connection
3.5-inch simple-swap backplate assembly cable connection
The following illustration shows the internal routing and connectors for the 3.5-inch hot-swap hard disk drives SAS/SATA signal, power and configuration cables with the SAS/SATA adapter installed.
Figure 2. 3.5-inch hot-swap backplane cable connection
3.5-inch hot-swap backplane cable connection
The following illustration shows the internal routing and connectors for the SAS/SATA signal, power and configuration cables with the SAS/SATA adapter installed.
Figure 3. 2.5-inch hot-swap backplane cable connection
2.5-inch hot-swap backplane cable connection