Removing and replacing Tier 1 CRUs

Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.

The illustrations in this document might differ slightly from your hardware.

Removing an adapter
Use this information to remove an adapter.
Replacing an adapter
The following notes describe the types of adapters that the server supports and other information that you must consider when you install an adapter.
Removing hot-swap drives
Use this information to remove a hot-swap hard disk drive.
Installing hot-swap drives
Use this information to install a hot-swap hard disk drive.
Removing a simple-swap SATA drive
Use this information to remove a simple-swap hard disk drive.
Replacing a simple-swap SATA drive
Use this information to Replacing a simple-swap hard disk drive.
Removing a CD/DVD drive
Use this information to remove a DVD drive.
Installing an optional CD/DVD drive
Use this information to install a DVD drive.
Removing the CD/DVD cable
Use this information to remove a CD/DVD cable.
Replacing the CD/DVD cable
Use this information to install a CD/DVD cable.
Removing a fan
Use this information to remove a fan in the server.
Replacing a fan
Use this information to replace a fan in the server.
Removing a memory module
Use this information to remove a memory module.
Replacing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs.
Removing a ServeRAID Controller
Use this information to remove an optional ServeRAID Controller.
Replacing an optional ServeRAID Controller
Use this information to Replace an optional ServeRAID Controller.
Removing a remotely installed RAID adapter battery
Use this information to remove a RAID adapter battery remotely in the server.
Replacing a RAID adapter battery remotely in the server
Use this information to install a RAID adapter battery remotely in the server.
Removing a USB embedded hypervisor flash device
Use this information to remove a USB embedded hypervisor flash device.
Replacing a USB embedded hypervisor flash device
Use this information to install a USB embedded hypervisor flash device.
Removing a hot-swap power supply
Use this information to remove a hot-swap power supply.
Replacing a hot-swap power supply
Use this information to install a hot-swap power supply.
Removing a hot-swap dc power supply
Use this information to remove a hot-swap dc power supply.
Replacing a hot-swap dc power supply
Use this information to install a hot-swap dc power supply.
Removing the fixed power supply
Use this information to remove the fixed power supply.
Replacing the fixed power supply
Use this information to install the fixed power supply.
Removing a PCI riser-card assembly
Use this information to remove a PCI riser-card assembly.
Replacing a PCI riser-card assembly
Use this information to install a PCI riser-card assembly.
Removing the operator information panel assembly
Use the information to remove the operator information panel assembly.
Replacing the operator information panel assembly
Use the information to replace the operator information panel assembly.
Removing the system battery
Use this information to remove the system battery.
Replacing the system battery
Use this information to install the system battery.
Removing the front USB connector board
Use this information to remove the front USB connector board.
Replacing the front USB connector board
Use this information to replace the front USB connector board.
Removing the front video connector
Use this information to remove the front video connector.
Replacing the front video connector
Use this information to replace the front video connector.
Removing the power interposer card assembly
Use this information to remove the power interposer card assembly.
Replacing the power interposer card assembly
Use this information to replace the power interposer card assembly.
Removing the hot-swap drive backplane
Use this information to remove the hot-swap drive backplane.
Replacing the hot-swap drive backplane
Use this information to install the hot-swap drive backplane.
Removing the simple-swap SATA drive backplate assembly
Use this information to remove the simple-swap drive SATA drive backplate assembly.
Replacing the simple-swap SATA drive backplate assembly
Use this information to replace the simple-swap drive SATA drive backplate assembly.

Parent topic: Removing and replacing structural parts