Configuring the server

The following configuration programs come with the server:

• Setup utility

  The UEFI Setup Utility program is part of the basic input/output system firmware. Use it to change interrupt request (IRQ) settings, change the startup-device sequence, set the date and time, and set passwords. For information about using this program, see Using the Setup utility.

• Boot Manager program

  The Boot Manager program is part of the server firmware. Use it to override the startup sequence that is set in the Setup utility and temporarily assign a device to be first in the startup sequence. For more information about using this program, see Using the Boot Manager program.

• IBM ServerGuide Setup and Installation CD

  The ServerGuide program provides software-setup tools and installation tools that are designed for the server. Use this CD during the installation of the server to configure basic hardware features, such as an integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating system. For information about using this CD, see Using the ServerGuide Setup and Installation CD.

• IBM FastSetup

  IBM FastSetup is a no-cost software tool that helps simplify the maintenance and deployment of selected IBM BladeCenter chassis, servers, and components. The intuitive graphical interface initializes all phases of server setup, including discovery, update, and configuration. Features include templates that enable replication of settings to many servers and automation that reduces hands-on time and user errors. Wizards and other default settings enable customization capabilities. The low-touch, set-once and walk-away feature reduces the hands-on server setup time from days to minutes, particularly for larger deployments. For information about this tool, see the IBM FastSetup website.

• Integrated Management Module

  Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information about using the IMM, see Using the integrated management module II and the Integrated Management Module User's Guide at the User's Guide for Integrated Management Module II.

• VMware ESXi embedded hypervisor

  An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase. Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the same time. The USB embedded hypervisor flash device installs in the USB connector on the system board. For more information about using the embedded hypervisor, see Using the embedded hypervisor.

• Remote presence capability and blue-screen capture

  The remote presence and blue-screen capture features are integrated functions of the Integrated Management Module II (IMM2). The remote presence feature provides the following functions:

  • Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system state
  • Remotely accessing the server, using the keyboard and mouse from a remote client
  • Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server
  • Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive

  The blue-screen capture feature captures the video display contents before the IMM restarts the server when the IMM detects an operating-system hang condition. A system administrator can use the blue-screen capture feature to assist in determining the cause of the hang condition.

• Ethernet controller configuration

  For information about configuring the Ethernet controller, see Configuring the Gigabit Ethernet controller.

• Configuring RAID arrays

  For information about configuring RAID arrays, see Configuring RAID arrays.

• IBM Advanced Settings Utility (ASU) program

  Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings. Use the ASU program online or out of band to modify UEFI settings from the command line without the need to restart the server to access the Setup utility. For more information about using this program, see Advanced Settings Utility program.

• Using the ServerGuide Setup and Installation CD
  Use this information as an overview for using the ServerGuide Setup and Installation CD.
• Using the Setup utility
  Use these instructions to start the Setup utility.
• Using the Boot Manager program
  Use this information for the Boot Manager.
• Starting the backup server firmware
  Use this information to start the backup server firmware.
• The UpdateXpress System Pack Installer
  The UpdateXpress System Pack Installer detects supported and installed device drivers and firmware in the server and installs available updates.
• Using the integrated management module II
  The integrated management module (IMM) is a second generation of the functions that were formerly provided by the baseboard management controller hardware. It combines service processor functions, video controller, and remote presence function in a single chip.
• Using the embedded hypervisor
  The VMware ESXi embedded hypervisor software is available on the optional IBM USB flash device with embedded hypervisor.
• Using the remote presence and blue-screen capture features
  The remote presence and blue-screen capture features are integrated functions of the integrated management module II (IMM2).
• Enabling the Intel Gigabit Ethernet Utility program
  Use this information to Enabling the Intel Gigabit Ethernet Utility program.
• Configuring the Gigabit Ethernet controller
  Use this information to configure the Gigabit Ethernet controller.
• Configuring RAID arrays
  Use the configuration utility programs to configure and manage redundant array of independent disks (RAID) arrays.
• Advanced Settings Utility program
  The Advanced Settings Utility (ASU) program is an alternative to the Setup utility for modifying UEFI settings.
• Using Lenovo XClarity Administrator
  
• Updating the Systems Director
  Use this information to update the Systems Director.
• Updating the Universal Unique Identifier (UUID)
  The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the Advanced Settings Utility to update the UUID in the UEFI-based server.
• Updating the DMI/SMBIOS data
  Use this information to update the DMI/SMBIOS data.