Skip to main content

S.51009 : [S.51009] No system memory has been detected.

[S.51009] No system memory has been detected.

No Memory Detected

Severity

Error

User Response

Complete the following steps:

  1. Make sure that one or more DIMMs are installed in the server.
  2. If no memory fault is recorded in the logs and no DIMM connector error LEDs are lit, verify that all DIMM connectors are enabled using the Setup utility or the Advanced Settings Utility (ASU).
  3. Re-Install all DIMMs verifying the correct population sequence, according to the service information for this product.
  4. (Trained service technician only) Replace the processor.
  5. (Trained service technician only) Replace the system board.