Configuring the server

The following configuration programs come with the server:

• Setup utility

  The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing the startup-device sequence, setting the date and time, and setting passwords. For information about using this program, see Using the Setup utility.

• Boot Manager program

  The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the Setup utility and temporarily assign a device to be first in the startup sequence. For more information about using this program, see Using the Boot Manager.

• FastSetup

  FastSetup is a no-cost software tool that helps simplify the maintenance and deployment of selected BladeCenter chassis, servers, and components. The intuitive graphical interface initializes all phases of server setup, including discovery, update, and configuration. Features include templates that enable replication of settings to many servers and automation that reduces hands-on time and user errors. Wizards and other default settings enable customization capabilities. The low-touch, set-once and walk-away feature reduces the hands-on server setup time from days to minutes, particularly for larger deployments. For information about this tool, see the IBM FastSetup website.

• Integrated management module

  Use the integrated management module 2.1 (IMM2.1) for configuration, to update the firmware and sensor data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information about using the IMM, see Using the integrated management module and the Integrated Management Module II User's Guide at the Integrated Management Module II User’s Guide .

• VMware ESXi embedded hypervisor

  The VMware ESXi embedded hypervisor software is available on the optional USB flash device or SD adapter. Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the same time. The USB embedded hypervisor flash device can be installed in USB connectors 3 and 4 on the system board. For more information about using the embedded hypervisor, see Using the embedded hypervisor.

• Remote presence capability and blue-screen capture

  The remote presence and blue-screen capture features are integrated functions of the integrated management module 2.1 (IMM2.1). The remote presence feature provides the following functions:

  • Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system state
  • Remotely accessing the server, using the keyboard and mouse from a remote client
  • Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server
  • Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive

  The blue-screen capture feature captures the video display contents before the IMM restarts the server when the IMM detects an operating-system hang condition. A system administrator can use the blue-screen capture feature to assist in determining the cause of the hang condition. For more information, see Using the remote presence and blue-screen capture features.

• Ethernet controller configuration

  For information about configuring the Ethernet controller, see Configuring the Ethernet controller.

• Features on Demand software Ethernet software

  The server provides Features on Demand software Ethernet support. You can purchase a Features on Demand software upgrade key for Fibre Channel over Ethernet (FCoE) and iSCSI storage protocols. For more information, see Enabling Features on Demand Ethernet software.

• Features on Demand software RAID software

  The server provides Features on Demand software RAID support. You can purchase a Features on Demand software upgrade key for RAID. For more information, see Enabling Features on Demand RAID software.

• Lenovo XClarity Essentials OneCLI

  You can use the config application and commands to view the current system configuration settings and make changes to Lenovo XClarity Controller and UEFI. The saved configuration information can be used to replicate or restore other systems. For information about configuring the server using Lenovo XClarity Essentials OneCLI, see: http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_settings_info_commands.html.

• Configuring RAID arrays

  For information about configuring RAID arrays, see Configuring RAID arrays.

• Using the Setup utility
  Use these instructions to start the Setup utility.
• Using the Boot Manager
  The Boot Manager program is a built-in, menu-driven configuration utility program that you can use to temporarily redefine the first startup device without changing settings in the Setup utility.
• Starting the backup server firmware
  The system board contains a backup copy area for the server firmware. This is a secondary copy of the server firmware that you update only during the process of updating the server firmware. If the primary copy of the server firmware becomes damaged, use this backup copy.
• Using the integrated management module
  The integrated management module (IMM) is a second generation of the functions that were formerly provided by the baseboard management controller hardware. It combines service processor functions, video controller, and remote presence function in a single chip.
• Using the remote presence and blue-screen capture features
  The remote presence and blue-screen capture features are integrated functions of the integrated management module 2.1 (IMM2.1).
• Using the embedded hypervisor
  The VMware ESXi embedded hypervisor software is available on the optional USB flash device or SD adapter.
• Configuring the Ethernet controller
  The Ethernet controllers are integrated on the system board. They provide an interface for connecting to a 10 Mbps, 100 Mbps, or 1 Gbps network and provide full-duplex (FDX) capability, which enables simultaneous transmission and reception of data on the network.
• Enabling Features on Demand Ethernet software
  You can activate the Features on Demand (FoD) software upgrade key for Fibre Channel over Ethernet (FCoE) and iSCSI storage protocols that is integrated in the integrated management module.
• Enabling Features on Demand RAID software
  You can activate the Features on Demand (FoD) software upgrade key for RAID that is integrated in the integrated management module.
• Configuring RAID arrays
  Through the Setup utility, you can access utilities to configure RAID.
• Updating Systems Director
  Use this information to update the Systems Director.
• Lenovo XClarity Essentials OneCLI
  Lenovo XClarity Essentials (LXCE) is a collection of server management utilities that provides a less complicated method to enable customers to manage Lenovo ThinkSystem, System x, and Thinkserver servers more efficiently and cost-effectively.
• Using Lenovo XClarity Administrator
  
• Updating the Universal Unique Identifier (UUID)
  The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the Lenovo XClarity Essentials OneCLI to update the UUID in the UEFI-based solution. Lenovo XClarity Essentials OneCLI is an online tool that supports several operating systems; make sure that you download the version for your operating system.
• Updating the DMI/SMBIOS data
  The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the Lenovo XClarity Essentials OneCLI to update the DMI in the UEFI-based solution. Lenovo XClarity Essentials OneCLI is an online tool that supports several operating systems; make sure that you download the version for your operating system.