Use this information to remove the Operating temperature
enhancement kit in the server.
Read the safety information in Safety and Installation guidelines.
If you are replacing a server component in the server,
you need to slide the server out from the rack enclosure, turn off
the server and peripheral devices, and disconnect the power cords
and all external cables.
To remove the Operating temperature enhancement kit, complete the following steps.
- Remove the cover (see Removing the cover).
- Remove the PCI riser-card assembly (see Removing the PCI riser-card assembly).
- Remove the Operating temperature enhancement kit from the system board (see System-board internal connectors for the location of the Operating
temperature enhancement kit connector on the system board).
Figure 1. Operating temperature enhancement kit connection for 2.5-inch
hard disk drive model
Figure 2. Operating temperature enhancement kit connection for 3.5-inch
hard disk drive model
Attention: Make sure that the cable is not pinched
and does not cover any connectors or obstruct any components on the
system board.
- Detach the Operating temperature enhancement kit from the connecting slot on the hard disk drive cage.
Figure 3. Operating temperature enhancement kit removal
If you are instructed to return the server component
or optional device, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.