Use this information to install the DVD drive.
Read the safety information in Safety and Installation guidelines.
If you are installing an optional device in the server,
you need to slide the server out from the rack enclosure, turn off
the server and peripheral devices, and disconnect the power cords
and all external cables.
To install the DVD drive, complete the following steps.
- Remove the cover (see Removing the cover).
- Remove the DVD drive filler panel if it is installed. Locate
the blue release tab on the rear of the DVD drive filler panel; then,
while you press the tab, push the DVD drive filler panel out of the
drive bay.
Figure 1. DVD drive filler panel removal
- Remove the retention clip from the side of the DVD drive
filler panel. Save the DVD drive filler panel for future use.
Note: If you are installing an optical drive that contains a
laser, observe the following safety precautions.
Statement
3

CAUTION:
When laser
products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters)
are installed, note the following:
- Do not remove the covers. Removing the covers of the laser product
could result in exposure to hazardous laser radiation. There are no
serviceable parts inside the device.
- Use of controls or adjustments or performance of procedures other
than those specified herein might result in hazardous radiation exposure.

DANGER
Some laser
products contain an embedded Class 3A or Class 3B laser diode. Note
the following.
Laser radiation when open. Do not stare into
the beam, do not view directly with optical instruments, and avoid
direct exposure to the beam.

- Touch the static-protective package that contains the new
optical drive to any unpainted metal surface on the server; then,
remove the optical drive from the package and place it on a static-protective
surface.
- Follow the instructions that come with the drive to set
any jumpers or switches.
- Attach the drive retention clip that you removed from the
DVD drive filler panel to the side of the new DVD drive.
Figure 2. DVD drive retention clip installation
- Align the DVD drive in the drive bay and slide the DVD
drive into the optical drive bay until the DVD drive clicks into place.
Figure 3. DVD drive installation
If you have other devices to install, do so now.
Otherwise, go to Completing the installation.