In-band automated boot recovery method

This section details the in-band automated boot recovery method.

Note: Use this method if the System board LED on the light path diagnostics panel is lit and there is a log entry or Booting Backup Image is displayed on the firmware splash screen; otherwise, use the in-band manual recovery method.
  1. Boot the server to an operating system that is supported by the firmware update package that you downloaded.
  2. Perform the firmware update by following the instructions that are in the firmware update package readme file.
  3. Restart the server.
  4. At the firmware splash screen, press F3 when prompted to restore to the primary bank. The server boots from the primary bank.
Parent topic: Recovering the server firmware (UEFI update failure)