The internal routing and connectors for the front USB cable.
The following notes describe additional information you must consider
when you install or remove the USB cable:
- To remove the USB cable on the system board, you have to press
on the release latch on the top of the USB cable connector before
you can pull out and disengage the USB cable connector from the USB
connector on the system board. Pulling the cable out of the connector
by excessive force might cause damage to the cable or connector.
- To connect the USB cable on the system board, press on the release
latch on the top of the USB cable connector. Pressing on one side
of the cable connector might cause damage to the cable or connector.
The following illustrations show the internal routing and connectors
for the front USB cable.
Note: Make sure the relevant cables pass through the cable clips.
Figure 1. USB cable connection