Removing the flash power module holder

Note: The flash power module holder is supported on the 2.5-inch-drive server models only.

To remove the flash power module holder, do the following:

  1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
  2. Remove the server cover. See Removing the server cover.
  3. Remove the flash power module. See Removing a RAID adapter battery or flash power module.
  4. Remove the two screws that secure the holder and then remove the holder.
    Figure 1. Flash power module holder removal
    Flash power module holder removal

  5. Complete the parts replacement. See Completing the parts replacement.
Parent topic: Removing and installing structural parts