Removing a RAID adapter battery or flash power module

Note

The RAID adapter battery or flash power module is supported on the 2.5-inch-drive server models only.

To remove a RAID adapter battery or flash power module, do the following:

1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
2. Remove the server cover. See Removing the server cover.
3. Remove the RAID adapter battery or flash power module.
   1. Remove the retainer.
   2. Open the retention clip.
   3. Pull the release tab outward.
   4. Lift the battery or flash power module up to remove the battery or flash power module from the holder.
   Figure 1. RAID adapter battery or flash power module removal
   

   

   
   
4. Disconnect the cable from the battery or flash power module.
5. Complete the parts replacement. See Completing the parts replacement.