Removing the power distribution board cover

To remove the power distribution board cover, do the following:

  1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
  2. Remove the server cover. See Removing the server cover.
  3. Remove any connected SAS/SATA signal cable and all other cables that pass through the power distribution board cover. See Internal cable routing.
  4. Remove the screw from the power distribution board cover. Then, lift the power distribution board cover up to remove it from the server.
    Figure 1. Power distribution board cover removal
    power distribution board cover removal

  5. Reinstall the power distribution board cover or install a new one. See Installing the power distribution board cover.