Logging in to the Web interface

To log in to the IMM2.1 Web interface, do the following:

  1. On a system that is connected to the server, open a Web browser. In the Address or URL field, type the IP address or host name of the IMM2.1 to which you want to connect.
    Note: If you are logging on to the IMM2.1 for the first time after installation, the IMM2.1 defaults to DHCP. If a DHCP host is not available, the IMM2.1 assigns a static IP address of 192.168.70.125. The IMM2.1 network access tag provides the default host name of the IMM2.1 and does not require you to start the server.
  2. On the Login page, type the user name and password. If you are using the IMM2.1 for the first time, you can obtain the user name and password from your system administrator. All login attempts are documented in the system-event log.
    Note: The IMM2.1 is set initially with a user name of USERID and password of PASSW0RD (with a zero, not the letter O). You have read and write access. You must change the default password the first time you log in.
  3. Click Log in to start the session. The System Status and Health page provides a quick view of the system status.
Note: If you boot to the operating system while in the IMM2.1 GUI and the message "Booting OS or in unsupported OS" is displayed under System Status > System State, disable Windows 2008 or 2012 firewall or type the following command in the Windows Server® 2008 or 2012 console. This might also affect blue-screen capture features.

netsh advfirewall firewall set icmpsetting type=8 mode=ENABLE

By default, the icmp packet is blocked by Windows Server firewall. The IMM2.1 GUI will then change to the "OS booted" status after you change the setting as indicated above in both the Web and CLI interfaces.