Skip to main content

Creating RAID volumes

This section describes how to use the Intel Rapid Storage Technology enterprise UEFI HII to create RAID volumes.

To create RAID volumes, do the following:

  1. Start the Setup Utility program. See Starting the Setup Utility program.

  2. Select System settings > Storage and press Enter.

  3. Select Intel RSTe SATA Controller and press Enter.

  4. Select Create RAID Volume and press Enter.

  5. Type a proper RAID volume name in the Name field and press Enter.
  6. Use the arrow keys to select a RAID level in the RAID Level field and press Enter.
  7. Use the arrow keys to select a hard disk drive in the Select Disk field and press Enter.

  8. If necessary, repeat step 7 to select multiple hard disk drives.

  9. Use the arrow keys to select a stripe size in the Stripe Size field and press Enter.
  10. Type a volume size in the Capacity (MB) field and press Enter.

  11. Select Create Volume and press Enter.

  12. When prompted, press Y to accept the warning message and create the volume.
  13. If desired, return to step 4 to create additional RAID volumes.