Removing and installing Tier 1 CRUs

Installation of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged.

The illustrations in this document might differ slightly from your hardware.

• Removing a DIMM
  
• DIMM installation guidelines
  The following tips describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs.
• Installing a DIMM
  
• Removing a hot-swap hard disk drive
  
• Installing a hot-swap hard disk drive
  
• Removing a simple-swap hard disk drive
  
• Installing a simple-swap hard disk drive
  
• Removing the optical drive
  
• Installing the optical drive
  
• Removing an adapter
  
• Installing an adapter
  
• Removing a ServeRAID SAS/SATA controller memory module
  
• Installing a ServeRAID SAS/SATA controller memory module
  
• Removing a RAID adapter battery or flash power module
  
• Installing a RAID adapter battery or flash power module
  
• Removing a USB embedded hypervisor flash device
  
• Installing a USB embedded hypervisor flash device
  
• Removing the front I/O assembly
  
• Installing the front I/O assembly
  
• Removing the operating temperature enhancement kit
  
• Installing the operating temperature enhancement kit
  
• Removing a system fan
  
• Installing a system fan
  
• Removing the coin-cell battery
  
• Installing the coin-cell battery
  
• Removing the fixed power supply
  
• Installing the fixed power supply
  
• Removing a hot-swap power supply
  
• Installing a hot-swap power supply
  
• Removing the PCI riser card from the PCI riser-card assembly
  
• Installing the PCI riser card to the PCI riser-card assembly
  
• Removing the 2.5-inch hot-swap hard-disk-drive backplane
  
• Installing the 2.5-inch hot-swap hard-disk-drive backplane
  
• Removing the 2.5-inch simple-swap hard-disk-drive backplate assembly
  
• Installing the 2.5-inch simple-swap hard-disk-drive backplate assembly
  
• Removing the 3.5-inch hot-swap hard-disk-drive backplane
  
• Installing the 3.5-inch hot-swap hard-disk-drive backplane
  
• Removing the 3.5-inch simple-swap hard-disk-drive backplate assembly
  
• Installing the 3.5-inch simple-swap hard-disk-drive backplate assembly