This topic provides instructions for Business Partners
on verifying the newly installed devices by running the Dynamic System
Analysis (DSA) stress test.
In addition to the instructions in this chapter for installing
optional hardware devices, updating firmware and device drivers, and
completing the installation, Business Partners must also do the following:
- After you have confirmed that the server starts correctly and
recognizes the newly installed devices and that no error LEDs are
lit, run the DSA stress test. For information about using DSA, see Dynamic System Analysis.
- Shut down and restart the server multiple times to ensure that
the server is correctly configured and functions properly with the
newly installed devices.
- Save the DSA log as a file and send it to Lenovo. See Sending DSA data to Lenovo.
- To ship the server, repackage it in the original undamaged packing
material and observe Lenovo procedures for shipping.
Support information for Business Partners is available at the PartnerWorld website.