Skip to main content

Dynamic System Analysis

Dynamic System Analysis (DSA) collects and analyzes system information to aid in diagnosing server problems. Lenovo provides DSA Preboot edition to users.

LXCE OneCLI collects and analyzes system information to aid in diagnosing server problems. OneCLI runs on the server operating system and collects the following information about the server:
  • Drive health information
  • Event logs for ServeRAID controllers and service processors
  • Hardware inventory, including PCI and USB information
  • Light path diagnostics status
  • Network interfaces and settings
  • Performance data and details about processes that are running
  • RAID controller configuration
  • Service processor (Integrated Management Module 2.1 (IMM2.1)) status and configuration
  • System configuration
  • Vital product data and firmware information

For system-specific information about the action that you should take as a result of a message that DSA generates, see DSA diagnostic test results.

If you cannot find a problem by using DSA, see Solving undetermined problems for information about testing the server.

Note
DSA Preboot might appear to be unresponsive when you start the program. This is normal symptom while the program loads.