Use this information to replace the bezel.
Read the safety information in Safety and Installation guidelines.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices, and disconnect the power cords and all external cables.
To install the bezel, insert the tab at the right end
of the bezel into the front of the chassis and pivot the bezel until
it snaps into place.
Figure 1. Bezel installation
If you are instructed to return the server component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Attention: For proper cooling and airflow, replace
the bezel and server cover before you turn on the server.