Use this information to remove the air baffle from the
server.
Read the safety information in Safety and Installation guidelines.
If you are replacing a server component
or an optional device in the server, you need to turn off the server
and peripheral devices, and disconnect the power cords and all external
cables.
To remove the air baffle, complete the following steps.
- Read the safety information that begins in the begin of
this documentation.
- Turn off the server and peripheral devices and disconnect
the power cords and all external cables, if necessary.
- Remove the cover (see Removing the cover).
- Grasp the air baffle; then, lift it up out of the server
and set it aside.
Figure 1. Air baffle removal
Attention: For proper cooling and airflow, replace
the air baffle before you turn on the server. Operating the server
with the air baffle removed might damage server components.